CFD Online Logo CFD Online URL
Home > Forums > CD-adapco

my pro-am shells

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   February 8, 2005, 18:58
Default my pro-am shells
Ted Crilly
Posts: n/a
hello there star-cd users

i have a model that has many surfaces in a large domain, i can use pro-am to generate a trimmed mesh with subsurface

however the shells it create on any surface that has a subsurface are created on the inside of the subsurface not the outside.

the outside of the subsurface is the domain boundary, but the inside of the subsurface is the edge of a fluid cell in the subsurface cell set, these shell sets are no use to me

i can use live,surf to create new shell sets on the subsurface OUTER boundary, but this is very tedious and time consuming as i need to delete other layers in the subsurface etc

does any user know of a way to get pro-am to automatically generate shells for the OUTER surface of the subsurface that it generates in its mesh.

any feedback appreciated tia

  Reply With Quote

Old   February 10, 2005, 18:51
Default Re: my pro-am shells
Ted Crilly
Posts: n/a
i found out that the shells are added to my main fluid domain, not the subsurface domain,

there is a button in pro-am to add shells in the mesh generation stage, but not for subsurface generation,

  Reply With Quote

Old   February 12, 2005, 18:24
Default Re: my pro-am shells
Posts: n/a
Have you tried the "flip shel orientation" functionality in the advanced parameters for subsurface generation. This might help (?)
  Reply With Quote

Old   February 15, 2005, 19:21
Default Re: my pro-am shells
Ted Crilly
Posts: n/a
Thanks for the reply Gudrun, i will give it a go and see if it does what i'm looking for, i have noticed this flip shell function in subsurface generation advanced menu but never touched it.


  Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
error in shells near the curves or edges Abhijit FLUENT 1 June 2, 2007 22:26
projecting on shells guest7777 CD-adapco 2 April 4, 2006 08:45
URGENT HELP: Shells with PSCREATE CAVER Values starcd_learner CD-adapco 2 February 1, 2006 11:03
Shells azmir CD-adapco 7 August 17, 2004 00:33
filling of elastic shells Nina Shokina Main CFD Forum 0 December 11, 2001 02:54

All times are GMT -4. The time now is 09:06.