(Fluid mixing) Mass fraction contours

January 13, 2005, 15:22

I am using a T-shaped micro-mixer to mix two fluid. I want to know how well the fluids have mixed and how long it has taken for them to mix. I believe the best way to find it is by using mass fraction contours. Has anyone already made a macro for this purpose? Or does anyone know a better way to find out how well the fluids have mixed? Only relying on density contours is not good enough because flow is laminar. Thanks in advance

January 14, 2005, 05:22

Isn't it enough to simply plot contours of the scalar concentration?

January 14, 2005, 05:32

How do I do this?

January 14, 2005, 15:30

GETV CONC 1 POPT CONT REPLOT

should do it...

January 28, 2005, 08:18

I'd like to know how to calculate mass fractio of amonnia, if I have 125.5mg/L NH3; mixture with water (non fresh water, with density = 1037 kg/m3)

February 20, 2005, 12:59

i am using a eductor for mxing how will i find the mass fraction of the mixed fluid and how will i know that the fuid is mixed properly

January 13, 2005, 15:22	(Fluid mixing) Mass fraction contours	#1
Toni Vainio Guest Posts: n/a	I am using a T-shaped micro-mixer to mix two fluid. I want to know how well the fluids have mixed and how long it has taken for them to mix. I believe the best way to find it is by using mass fraction contours. Has anyone already made a macro for this purpose? Or does anyone know a better way to find out how well the fluids have mixed? Only relying on density contours is not good enough because flow is laminar. Thanks in advance

January 14, 2005, 05:22	Re: (Fluid mixing) Mass fraction contours	#2
Brian Guest Posts: n/a	Isn't it enough to simply plot contours of the scalar concentration?

January 14, 2005, 05:32	Re: (Fluid mixing) Mass fraction contours	#3
Toni Vainio Guest Posts: n/a	How do I do this?

January 14, 2005, 15:30	Re: (Fluid mixing) Mass fraction contours	#4
Brian Guest Posts: n/a	GETV CONC 1 POPT CONT REPLOT should do it...

January 28, 2005, 08:18	Re: (Fluid mixing) Mass fraction contours	#5
Ricardo Guest Posts: n/a	I'd like to know how to calculate mass fractio of amonnia, if I have 125.5mg/L NH3; mixture with water (non fresh water, with density = 1037 kg/m3)

February 20, 2005, 12:59	Re: (Fluid mixing) Mass fraction contours	#6
craysacfx Guest Posts: n/a	i am using a eductor for mxing how will i find the mass fraction of the mixed fluid and how will i know that the fuid is mixed properly

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
volume fraction,mass fraction,bulk mass flow	nick	CFX	0	April 25, 2008 09:51
How set volume fraction and species mass fraction	Reginaldo Cotto	FLUENT	0	August 31, 2006 04:58
volume fraction, Mass fraction and Bulk Mass flow	Dr.jones	CFX	1	January 25, 2006 04:32
extension for liquid fraction contours	venugopal	FLUENT	0	June 11, 2004 01:27
ideal gas mixing law and mass-weighted mixing law	Shankar	FLUENT	0	June 24, 2003 13:25