CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   CD-adapco (http://www.cfd-online.com/Forums/cd-adapco/)
-   -   double precission (http://www.cfd-online.com/Forums/cd-adapco/54390-double-precission.html)

Mari February 21, 2005 12:24

double precission
 
Hello,

I built a grid with 1,25 mio cells. The smallest cell side is at 2 microns. There is up to now nothing special, only an inlet and an outlet. I am working with V3.150 on red hat linux. Running in single precission, there is no problem, the result looks feasible. Changing to double precission, the star_inter.sh produces strange outputs, something with executable name memory access fault >> EOD

EOD

Could someone give me a hint?


F.K. February 22, 2005 04:17

Re: double precission
 
You don't have enough working memory for double prescision.

F.K.

nicola February 22, 2005 06:20

Re: double precission
 
how can I increase my working memory?

Brian February 24, 2005 05:13

Re: double precission
 
Only way I know is to buy more RAM.

The max RAM you can practically use in a 32 bit machine is about 3.5GB, but you can put a LOT more in a 64 bit machine.


All times are GMT -4. The time now is 03:58.