CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   CD-adapco (http://www.cfd-online.com/Forums/cd-adapco/)
-   -   coarse grid to fine grid crashing (http://www.cfd-online.com/Forums/cd-adapco/54393-coarse-grid-fine-grid-crashing.html)

Arnab February 22, 2005 11:58

coarse grid to fine grid crashing
 
Hello

I have a quick question,

First, we ran transient successfully with a coarse grid. After using the coarse grid solution to restart the fine grid case using the same time step and the default solution parameters, the code crashed with negative densities. Is this a symptom of having too big a time step or relaxation parameters? Can anyone recommend some values?

Richard February 22, 2005 13:27

Re: coarse grid to fine grid crashing
 
The Courant number is inversely proportional to the cell size, so if you have the same velocity and time-step, Co will increase. The higher Co, the more likely instability. If you refine the mesh, it's good practice to reduce the time-step accordingly.


All times are GMT -4. The time now is 22:40.