CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CD-adapco

error message abot LES

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   February 25, 2005, 07:56
Default error message abot LES
  #1
Ben Lu
Guest
 
Posts: n/a
I study in pipe flow by the method of Les form.I set two inlets and one outlet ,and turbulence model set by Les/smagorinsky.I try to mant times set transient form in the time domain,but Starcd always shows mess error. "analysis must be transient and catnot use upwind for velocities to use an LES turbulence model" I already set qick for differencing schemes,but starcd still show the same error message.How to solve the question? thank~
  Reply With Quote

Old   March 6, 2005, 23:14
Default Re: error message abot LES
  #2
tomosada
Guest
 
Posts: n/a
hi ! The message can be ignore if you sure the UVW different option has already changed.

If you want to calcuation LES simulation, the mesh quality is very important. The near wall refine mesh needed.

And the delta T have to be test.
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Error message-Floating point error Vaibhav FLUENT 3 December 7, 2007 06:38
UDF error message samy FLUENT 1 October 28, 2007 17:32
ERROR MESSAGE: line 1: parse error Lourival FLUENT 1 February 18, 2006 02:35
error message abot LES Ben CD-adapco 1 February 25, 2005 09:23
Gambit 2.0 - Error Message (ACIS ERROR 1200) James FLUENT 1 May 14, 2003 08:13


All times are GMT -4. The time now is 09:20.