|
[Sponsors] |
March 14, 2005, 05:49 |
baffle boundary
|
#1 |
Guest
Posts: n/a
|
Hi
I am simulating heattransfer between two fluids seperated by baffle. I am giving counducting baffle boundary condition with resistance. I am not getting the proper temperature distribution. Should I re ally go for conjugate heat transfer or the baffle will suffice. sankar |
|
March 15, 2005, 05:48 |
Re: baffle boundary
|
#2 |
Guest
Posts: n/a
|
Conductive baffle boundary condition is suffice for this purpose. Because I do not know your geometry and problem setting I can not advice you the correct setting.
|
|
March 15, 2005, 23:08 |
Re: baffle boundary
|
#3 |
Guest
Posts: n/a
|
I am trying to simulate heatransfer between refrigerant and air in a condenser. I have modelled refrigerat, air and seperated by baffle cells for the tube portion and fins.turbulent flow with ke is assumed. inlet conditions of refrigerant 68C and 14.8 bar
air 40C 1 atm after analysis temperature for a length of 300 mm is reduce to 20c how this is possible ie refrigerant is cooled below air temperature. |
|
March 16, 2005, 03:54 |
Re: baffle boundary
|
#4 |
Guest
Posts: n/a
|
In my opinion, this is not caused by baffle cells. Problem is probably in boundary setting. 20C is Star CD standard setting (e.g. inlet temperature for pressure boundary). If you forget to change it, interesting things can happened. On the other hand some differential schemes make me problems during temperature calculations (but in these cases the temperature is increasing more and more over the boundary values). PS. Have you got some warnings in your *.info file?
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Boundary baffle error 258 | Nalleli | Siemens | 2 | November 19, 2006 13:14 |
what different between wall and baffle | tipakorn | Siemens | 5 | July 25, 2006 03:50 |
Boundary conditon of a baffle in the MRF region | bono | FLUENT | 1 | February 26, 2006 04:07 |
HELP: baffle generation | sunlight | Siemens | 3 | July 29, 2005 03:07 |
baffle in use | guang ai | Siemens | 3 | November 10, 2003 04:51 |