CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CD-adapco

About promove

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   March 14, 2005, 11:35
Default About promove
  #1
Ricklee
Guest
 
Posts: n/a
hi all: I use moving grid to solve the problem.But when I am staring to solve the problem.The message always show "executing promove.bat" and then nothing happens.I have searched the past disscussions about the problem but can not find a way to solve it.Could someone help me,please?
  Reply With Quote

Old   March 14, 2005, 13:32
Default Re: About promove
  #2
Somnath
Guest
 
Posts: n/a
when this comes, u simply restart er PC and then again run, i think it wil not come. the same thing happened to me also.

another thing u can do u copy the .mdl, .evn, parm.inc and ufile to another folder and then run er events again, write geom and prob file and then run.
  Reply With Quote

Old   March 15, 2005, 00:08
Default Re: About promove
  #3
RickLee
Guest
 
Posts: n/a
Thanks for your response. I restar my PC and change another folder. But the problem is still happen. I have no idea what to do.
  Reply With Quote

Old   March 15, 2005, 03:46
Default Re: About promove
  #4
Somnath
Guest
 
Posts: n/a
the same problem i was having when i was running moving mesh for compressor. at that time i did the same thing as i told u. i simply restarted my pc then again run without doing anything...the problem went off.

the next option that i told u to change folder somtimes there also the problem was coming thats why i found it suitable to only restart the pc...the exact reason i dont know also.
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -4. The time now is 22:57.