CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CD-adapco

Help: Moving Mesh with SUBROUTINE

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   March 21, 2005, 23:31
Default Help: Moving Mesh with SUBROUTINE
  #1
Dorain
Guest
 
Posts: n/a
I use the following codes in prostar:

time trans | mvgrid on | geom,XXX | prob,XXX

then in terminal,

pmovlink Are you running a local Prostar version? Please enter y or n [n] Please enter the required Prostar driver: Available drivers are: x xm glm [x] Linking pmov executable... FORTRAN 77 Compiler 7.5, Copyright (c) 1987-2001, Absoft Corp. ENTER CASE NAME GEOMETRY FILE TITLE

*** ERROR *** MAX PROSTAR CELL NUMBER EXCEEDS 1

RELINK pmov AFTER UPDATING THE PARAMETER FILE

===============================================

HOW TO make it correct? thanks
  Reply With Quote

Old   March 22, 2005, 02:09
Default Re: Help: Moving Mesh with SUBROUTINE
  #2
Jörn Beilke
Guest
 
Posts: n/a
You have to do the pmovlink only if you work with events or do the mesh movement with prostar. So how does you move the mesh? It seems that you have no events defined.

It might help you to run the mixer tutorial at first.
  Reply With Quote

Old   March 22, 2005, 04:24
Default Re: Help: Moving Mesh with SUBROUTINE
  #3
dorain
Guest
 
Posts: n/a
I move the mesh only with NEWXYZ.f. thanks a lot.
  Reply With Quote

Old   March 22, 2005, 06:55
Default Re: Help: Moving Mesh with SUBROUTINE
  #4
John Luo
Guest
 
Posts: n/a
Then, you don't need to run pmovlink at all.
  Reply With Quote

Old   March 22, 2005, 08:52
Default Re: Help: Moving Mesh with SUBROUTINE
  #5
dorain
Guest
 
Posts: n/a
that is to say: I use the "mvgrid on" only, then "starlink". that's ok?
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Moving Reference frame - UDF - Moving mesh modisa FLUENT 0 April 18, 2008 13:31
moving mesh in cfx Ravi CFX 2 June 12, 2007 14:01
moving mesh Mac CD-adapco 0 December 16, 2005 03:57
Moving Mesh & Not Rotating Mesh AB CD-adapco 1 October 25, 2004 03:10
moving mesh Javier Fernandez FLUENT 1 August 31, 2000 19:55


All times are GMT -4. The time now is 05:15.