CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CD-adapco

Can not allocate memory~

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   March 23, 2005, 01:49
Default Can not allocate memory~
  #1
lenson
Guest
 
Posts: n/a
Here is a problem Yesterday I build a model using about 2000000 cells .when I locate the boundary ,the output command shows " can`t allocate memory . " Does it mean that I should add RAM to the motherboard to enhance its memory ?
  Reply With Quote

Old   March 23, 2005, 11:55
Default Re: Can not allocate memory~
  #2
nicolas
Guest
 
Posts: n/a
The response is unfortunately yes....
  Reply With Quote

Old   March 23, 2005, 21:44
Default Re: Can not allocate memory~
  #3
lenson
Guest
 
Posts: n/a
Thank you today I actually add a new RAM to motherboard . rebuild the model It works~ ha ha~ Thank you~
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Cannot allocate memory for arrays (1400,1000) Quarkz Main CFD Forum 5 January 27, 2008 07:38
Failed to allocate memory. Tufsen FLUENT 0 February 26, 2007 11:28
Gambit unable to allocate dynamic memory Abhijeet Karnik FLUENT 0 October 2, 2006 12:59
Proam ERROR:Could not allocate more memory Erika CD-adapco 10 November 16, 2004 21:42
INSUFFICIENT SPACE ON MACHINE TO ALLOCATE MEMORY Andrea CFX 2 October 19, 2004 13:10


All times are GMT -4. The time now is 13:11.