CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CD-adapco

Changing Temperature & Divergence

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   March 24, 2005, 04:26
Default Changing Temperature & Divergence
  #1
Shazlan
Guest
 
Posts: n/a
Hi,

I am analyzing the flow inside the toiletbowl. Here are some few relevant info on the model:

1. 19 inlet boundaries, 2. 2 static pressure boundaries-one at the exit and another at the open-top area (with environment on) 3. im using VOF option, since the water and air in a toiletbowl dont mix. 4. on the scalar bound. tab, every inlet is set to scalar #1, which is the VOF 5. the diff scheme used is MARS 6. the time step used is .004 (highest used before diverge was .005) 7. transient analysis

after running up to about 170 iterations (about .7 secs), the solution diverges. i reduced the time step & the residual tolerance further and yet, still diverges. i looked at the .info file, it shows that the min and max temp are 54K and 14000K respectively, while the average stays at 310K. now the questions i have is:

1. what makes the temp increase as such, when as far as i am aware of, nothing contributes to that increment? in increase of 20K while flushing the bowl just doesnt make sense, does it?

2. why couldnt i run the analysis further? what are the other parameters that i should be aware of in transient analysis, so that the solution doesnt diverge.

and yeah, i kept on getting warning #007, which i think can be neglected, right?

please advice. thanks!

  Reply With Quote

Old   March 24, 2005, 05:42
Default Re: Changing Temperature & Divergence
  #2
Jörn Beilke
Guest
 
Posts: n/a
Usually you don't solve for the temperature when doing a VOF calculation. There must be something wrong with the setup.
  Reply With Quote

Old   March 24, 2005, 10:10
Default Re: Changing Temperature & Divergence
  #3
Shazlan
Guest
 
Posts: n/a
do you know where can the error possibly be at? i looked at almost every setting but nothing tells me that it is wrong. what may have i overlooked?

thanks for your help!
  Reply With Quote

Old   March 30, 2005, 01:33
Default Re: Changing Temperature & Divergence
  #4
matej
Guest
 
Posts: n/a
I have to support Jorn, do you think the temperature difference would make a big effect in splashing? If it does not work, simplify the physics.

btw. it's really interesting problem, is there any journal on it, or is it all company secret? ))

matej
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Changing Temperature in Cyclic patch panara OpenFOAM Running, Solving & CFD 3 March 30, 2011 11:28
cavitation with changing temperature Elyor CD-adapco 2 September 20, 2007 09:55
temperature not changing! lizhihua CD-adapco 0 September 14, 2007 09:29
set a temperature(T) changing with deep (Z) limingtiger CD-adapco 2 September 23, 2005 00:23
CFX4: temperature is changing Miroslav Babic CFX 1 March 2, 2004 19:58


All times are GMT -4. The time now is 04:32.