CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CD-adapco

Problem in importing the Mesh

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   March 25, 2005, 04:56
Default Problem in importing the Mesh
  #1
fred
Guest
 
Posts: n/a
Hello everybody, I have a problem in importing mesh in star-cd. Mesh is generated in ICEM hexa,in icem hexa when i select starcd as the solver it generates three files, .inp file,.cel file and .vrt file.When i try importing the mesh in star guide with icem ticked on it asks for .inp file when i invokethe file and click import grids,i couldnt see anything in display window, i even tried directly ticking prostar and then import grid since i have the .cel and .vrt files. i knew somewhere i am going wrong, Can anyone help me? note: its a structured mesh.

Thanks in advance Regards Fred
  Reply With Quote

Old   March 25, 2005, 05:31
Default Re: Problem in importing the Mesh
  #2
Bhaskar
Guest
 
Posts: n/a
Hello Fred,

You need four files to export mesh from ICEM to STAR. They are .inp, .bnd, .cel and .vrt files. After importing .inp file through star guide use the following commands in I/O window of star.

cset,all

cplot

Hope this helps,

Bhaskar

  Reply With Quote

Old   April 5, 2005, 01:17
Default Re: Problem in importing the Mesh
  #3
Piyush
Guest
 
Posts: n/a
You need to place all the files i.e. *.inp , *.cel, *.vrt in one folder and then just read the *.inp file. Since the *.inp file already has instructions to import the other files, all the importing is done automatically.
  Reply With Quote

Old   April 12, 2005, 00:19
Default Re: Problem in importing the Mesh
  #4
fred
Guest
 
Posts: n/a
Thanks piyush and bhaskar.Its working.
  Reply With Quote

Old   May 13, 2005, 12:36
Default Re: Problem in importing the Mesh
  #5
sun
Guest
 
Posts: n/a
Hi,

Can anyone explain about descriptions of the variables in the .inp, .bnd. cel, and vrt files?

sun
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Importing mesh problem ParodDav CFX 1 May 14, 2007 18:15
A problem about Importing mesh from fluent aderliner OpenFOAM Running, Solving & CFD 0 December 18, 2006 23:05
Problem on importing IDEAS mesh Bernd Horlacher CFX 2 May 21, 2003 02:09
Problem importing ANSYS mesh, please help Ankan Kumar FLUENT 1 February 2, 2003 08:38
fluent mesh importing problem Phil FLUENT 0 February 19, 2002 03:44


All times are GMT -4. The time now is 01:20.