CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CD-adapco

Chem. Reaction and Ignition Setting in ICE Problem

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   March 28, 2005, 00:02
Default Chem. Reaction and Ignition Setting in ICE Problem
  #1
Tulus
Guest
 
Posts: n/a
Dear All, I am performing a computation of temperature during one cycle in a two-stroke engine using Star-CD v 3.22. I used the Star-CD Manual Chapter 9 to set the chemical reaction and the iginition. I included the setting into the ICE problem from the manual Chapter 13.1. But, I think the result is not appropriate with respect to the result of the same problem of chapter 13.1 without the reaction and ignition. The presure of chemical ignited chemical reaction during after ignition was lower then the problem without ignition one.

Can anyone help me to get a suggestion for this proble?
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Setting Chemical Reaction usker CD-adapco 2 April 29, 2009 09:21
ignition problem Parthiban CD-adapco 0 May 17, 2008 02:33
volatiles combustion reaction: composition setting Francesco FLUENT 0 March 10, 2008 11:42
Ignition problem (ICE modelling) hennie CD-adapco 0 August 13, 2002 03:58
Ignition problem Julie Polyakh CD-adapco 0 January 29, 2002 06:39


All times are GMT -4. The time now is 03:27.