CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CD-adapco

Display in Windows

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   April 8, 2005, 00:32
Default Display in Windows
  #1
Anthony
Guest
 
Posts: n/a
Hello all. I am new to Star-CD and am having problems with getting the display to work properly in the Windows XP Pro environment. I have installed the version of XVision that came with the software; however, I keep getting an error message when I try to open any of the products available from the Star-Launch screen such as Pro-Star, etc. The error says "Error attempting to open X display". It seems like this must be an environment variable that needs to be set but I have tried and tried without any success to configure it properly. Any help that can be offered would be much appreciated. Thanks in advance.

Anthony
  Reply With Quote

Old   April 8, 2005, 03:15
Default Re: Display in Windows
  #2
Anton Lyaskin
Guest
 
Posts: n/a
Try to start XVision manually before launching something from StarLaunch
  Reply With Quote

Old   April 8, 2005, 04:37
Default Re: Display in Windows
  #3
Michele
Guest
 
Posts: n/a
Try to go to the Vision Communications applet in the Controls Panel. Select the Transports tab. Highlight the TCP-Unix option and press the Properties button. Change the Availability Status to Enable this transport. Also ensure that Include this transport in automatic selection is checked.

You can also try to read the STAR-CD FAQ section about Display problems.
  Reply With Quote

Old   April 30, 2005, 10:31
Default Re: Display in Windows
  #4
Fred
Guest
 
Posts: n/a
Hi Anthony,

You should open exceed from hummingbird b4 opening prostar/proam

I think this should help

Regards Fred
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
How to display dT/dx? Williams FLUENT 7 October 27, 2012 17:44
Display static pressure and pathline isame windows GregC FLUENT 1 October 18, 2007 08:31
display options Jakub FLUENT 2 October 5, 2005 07:39
problems with Fluent display windows chris FLUENT 2 October 23, 2003 17:23
Graphics Display Andrew FLUENT 3 June 10, 2003 06:24


All times are GMT -4. The time now is 14:16.