CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CD-adapco

thp question of moving grid

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   April 19, 2005, 05:48
Default thp question of moving grid
  #1
ricklee
Guest
 
Posts: n/a
hi ,dear all:

I run a model of moving grid.But when it begins to run the program,always disply the error message.The message is "Error#240 96 master faces and 96 slave face remain unmatched; check moving grid command or change area tolerance factor". Can any one give some advice about the problem?
  Reply With Quote

Old   May 29, 2005, 05:01
Default Re: thp question of moving grid
  #2
roger
Guest
 
Posts: n/a
hello!When you run the model using ASI as tut11-1,you will get the result.I have the same problem like you,but when i have modified the cgrid.cgrd,i got the correct result.Please refer to tut13-1,understand the content of it and you will solve your problem.you can contact me by QQ:359489266.
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
moving grid mazaheri FLUENT 1 July 19, 2006 12:07
moving grid Dr C.Bhasker CD-adapco 4 August 31, 2005 02:29
some question about moving grid and fortran shure CD-adapco 4 April 18, 2005 22:12
Moving Body Grid Question Matt Main CFD Forum 5 September 13, 2004 00:45
Moving grid(BC) faithkim Main CFD Forum 11 September 11, 1999 14:07


All times are GMT -4. The time now is 00:08.