CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > Siemens

Trimmed mesh in Proam

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   May 11, 2005, 18:19
Default Trimmed mesh in Proam
  #1
Sam
Guest
 
Posts: n/a
Hello everybody,

I am new to proam or you can say StarCD. I have imported a 3D mesh in StarCD from gambit. I wanted to try the automated mesh generation technique on this using proam. Can this be acheived using graphical tools in StarCD or is there no was running from commands. Thanks in advance.

Regards Sam.
  Reply With Quote

Old   May 29, 2005, 21:16
Default Re: Trimmed mesh in Proam
  #2
Kevin
Guest
 
Posts: n/a
Hi Sam,

You will need to provide a little more information such as what format was used for the geometry transfer from Gambit. If it is a file format recognized by pro-am (eg STL or Nastran) and the surface is closed then it should be ready for immediate use in the software and you can start making a trimmed mesh for it. Depending on which version of STAR-CD you are running, the pro-am GUI tools are available in the AutoMesh or Advanced pull down menu at the top right of pro-STAR. Look at the user guide and tutorial set for pro-am for more details on how to make a mesh using the GUI panels.
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
problem in mesh generation-PROAM Bala Siemens 0 February 21, 2008 05:27
trimmed mesh Tester Main CFD Forum 0 January 6, 2008 12:32
Ngeom Crashing on Trimmed / Hexahedral Mesh Fr Ted Crilly Siemens 2 October 13, 2005 08:08
[Commercial meshers] Trimmed cell and embedded refinement mesh conversion issues michele OpenFOAM Meshing & Mesh Conversion 2 July 15, 2005 05:15
trimmed mesh novice Siemens 5 April 18, 2005 04:32


All times are GMT -4. The time now is 11:14.