CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CD-adapco

Fluent mesh 2 star-cd

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   May 9, 2005, 03:16
Default Fluent mesh 2 star-cd
  #1
pp
Guest
 
Posts: n/a
Hi,

I made my geometry and mesh in Gambit preprocesor. I'm not satisfied with fluent results with that mesh and now I'm going to try star-cd.

What is the bast way to convert fluent mesh in star-cd mesh. All I want is to convert mesh in star-cd but also to keep defined boundaries (eg. walls, inlets, outlets etc.)

I tried cgns and gambit commands but after mesh was succesfully read in start I found only one fluid zone without boundaries I mentioned above.

Regards, pp
  Reply With Quote

Old   May 9, 2005, 05:21
Default Re: Fluent mesh 2 star-cd
  #2
vladimir
Guest
 
Posts: n/a
hi pp

I cannot help you with the export of the BCs exactly as they are defined in fluent but if you use export to nastran and select to export surfaces that define the BCs then it quite works. You import the grid into star and obtain fluid and shell cells where the shells represent the surfaces from fluent. To assign BCs to these shouldn't be a problem unless you've got tens or hundreds of BCs defined ). hope it helps. have fun.
  Reply With Quote

Old   May 9, 2005, 06:34
Default Re: Fluent mesh 2 star-cd
  #3
tomosada
Guest
 
Posts: n/a
Hi!

You can use gambit command to import the mesh to star-cd

tomosada
  Reply With Quote

Old   May 30, 2005, 07:39
Default Re: Fluent mesh 2 star-cd
  #4
Esti
Guest
 
Posts: n/a
Hi there, You have to save in gambit your mesh as "neutral", so you get a *.neu file (file_name.neu)

Once you are in star-cd, type the following command: "gambit file_name.neu"... And that's it! (You've got more details in starCD's command help typing "gambit")
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
mesh from Star design and use in FLUENT?? Waseem Main CFD Forum 0 December 17, 2008 07:25
Mesh from Star Design in FLUENT Waseem CD-adapco 0 December 17, 2008 07:24
export mesh from STAR-CD to FLUENT HADD CD-adapco 1 August 4, 2007 04:36
export mesh from STAR-CD to FLUENT HADD FLUENT 0 August 1, 2007 04:40
How to convert STAR mesh into FLUENT mesh ? Jihwan CD-adapco 8 November 10, 2004 05:11


All times are GMT -4. The time now is 05:42.