CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CD-adapco

Modelling in EZ-Turbo

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   May 9, 2005, 06:11
Default Modelling in EZ-Turbo
  #1
Ant
Guest
 
Posts: n/a
I've got several problems preparing surfaces in ez-turbo! If somebody deals with radial machines, please write about error "MORE THAN ONE CONTINUOUS BLADE CROSS-SECTION FOUND" which occurs at generating streamlines! The blade is twisted!

Thanks!
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
G/Turbo nathan FLUENT 1 April 27, 2007 18:19
G/Turbo Jack FLUENT 1 January 15, 2007 14:06
G turbo bharat FLUENT 0 September 7, 2005 19:12
about EZ turbo mohr76 CD-adapco 0 July 26, 2004 08:18
about EZ-Turbo Ling-Chia CD-adapco 1 December 22, 2002 23:30


All times are GMT -4. The time now is 14:18.