CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CD-adapco

modeling a radiant panel

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   May 9, 2005, 12:25
Default modeling a radiant panel
  #1
Ted Crilly
Guest
 
Posts: n/a
hi there star users,

is it possible to model a radiant panel heater in Star-CD, i have a situation with a number of these units located at high level.

The results should show the distribution of temperature in the domain, due to the radiant exchange from the units to the space surfaces etc,

the units are basically high surface temperature sources that radiant heat

any advice appreciated here

thanks in advance

ted
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Radiant Floor Young CFX 0 March 10, 2008 15:38
[Radiant Floor] building model Young CFX 0 March 7, 2008 12:57
Radiation temperature and Mean radiant temperature Arnold FLUENT 0 March 16, 2006 05:35
help 3D panel method sam CD-adapco 1 June 25, 2004 14:26
external radiant flux input than Phoenics 3 August 21, 2000 08:18


All times are GMT -4. The time now is 17:28.