CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CD-adapco

MPI Application in HPC

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   May 19, 2005, 01:50
Default MPI Application in HPC
  #1
wendy
Guest
 
Posts: n/a
Hi All,

I am running the calculation of our engine simulation using HPC 4 processors (SGI Origin 200). The problem I have now is that after certain time steps (usually more than 1200 time steps), the calculation will be terminated and stopped because of MPICH was killed. The error message for your info can be displayed as follows:

FINISH TIME STEP NO. 1215

CPU TIME IS 14531.15 ELAPSED TIME IS 20020.70 MEMORY (DYNAMIC) U SED IS 41 MBYTES

/opt/STAR-CD/v3.22.001/MPICH/1.2.4/irix64_6.5-mips4-cc_7.3-dso/ch_shmem/bin/mpirun[146]: 962853 Killed

PNP: Received [2005-04-14-01:06:06] SIGTERM from HOST "cngdi", MVMESH process -ID "967826".

PNP: Received [2005-04-14-01:06:07] SIGKILL from HOST "cngdi" TRACKER process -ID "971806". PNP: Saving STAR merged output file "star.run".

PNP: Saving STAR merged output file "star.info".

PNP: Saving STAR merged output file "star.pst".

PNP: Saving STAR merged output file "star.pstt".

PNP: Saving STAR master output file "star.rsi".

PNP: Saving STAR master output file "star.spd01".

PNP: Saving STAR master output file "star.spd02".

PNP: Saving STAR master output file "star.spd03".

PNP: Saving External moving mesh code output file "mvmesh.log".

PNP: Shutdown [2005-04-14-01:08:11] Execution stopped due to process failure (SIGTERM) after 20169 seconds (TOTAL ELAPSED TIME).

For your information to everyone, we are using MPI Application that is MPICH for running this calculation. And our HPC is single node-lock license. But we connect to the other server (SGI Fuel)to display the window message (what I mean is the calculation value, CPU time and etc) instead of data message only. So there is an message passing interface in our case. That's why we use MPI application for this purpose.

I suspected that this problem related to the MPI capability and also depend on the network system and distribution as well as our connection line (cable).

Does anyone have a problem like this?

Please advice and teach me,please........please.......

Any help will be appreciated highly.

Regards,

Wendy Hardyono Kurniawan
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
y+ application vivek.k.yakkundi FLUENT 2 October 22, 2007 12:17
application of CFD REKHA FLUENT 1 January 13, 2005 02:25
application of cfd samuel R devadoss Main CFD Forum 0 March 15, 2004 05:38
Application Example 1 omondi CFX 1 January 31, 2002 12:15
PER & MIR application dimitris Main CFD Forum 1 January 14, 2001 06:10


All times are GMT -4. The time now is 10:37.