CFD Online Logo CFD Online URL
Home > Forums > CD-adapco

Temperature profile in Solid cells

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   May 19, 2005, 04:44
Default Temperature profile in Solid cells
Posts: n/a
hello all,

My geometry consists of solid and fluid cells. The solid cells have two Boundary conditions. 1)The Boundary condition at the contact of fluid cells is Default Wall. 2)The other Boundary condition is Wall with constant Heat flux.

The problem is, I could not see any Temperature behavior within the solid cells while postprocessing but can see the behavior in fluid cells.

It would be really nice, if you could give me a suitable reply. Regards, Pramod.
  Reply With Quote

Old   May 19, 2005, 08:07
Default Re: Temperature profile in Solid cells
Posts: n/a
The wall bc between solid and fluid must be Wall-conductive. How much solid cells do you have? Probably the gradient is very small and you only have to change the cscale?
  Reply With Quote

Old   May 20, 2005, 13:24
Default Re: Temperature profile in Solid cells
Posts: n/a
hi pramod,

i am also getting the same problem, i already made a query on this. but i got no answer. someday told the same way as the pete told. but that is not sufficient for us to forward.
  Reply With Quote

Old   May 30, 2005, 13:56
Default Re: Temperature profile in Solid cells
Posts: n/a
Hi Manohar,

The behaviour in Solid cells can be seen. In the Post-processing, when you select the Temperature in the Scalar quantities rather than Total temperature in Calculated scalar quantities and keeping the Cell type activated.I hope it works for you.

with regards, Pramod
  Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
coupling solid and fluid cells?? kcg CD-adapco 4 March 13, 2007 10:39
Temperature profile across solid/interface/fire Jie FLUENT 0 August 1, 2006 23:29
Solid cells on symplane boundaries samu CD-adapco 7 May 29, 2006 10:07
Flow through solid cells Julie Polyakh CD-adapco 1 September 6, 2003 08:18
Building solid cells kerem pekkan CD-adapco 0 November 21, 2000 18:47

All times are GMT -4. The time now is 13:16.