CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CD-adapco

Need Similar Combustion Tutorial as my model

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   May 24, 2005, 18:23
Default Need Similar Combustion Tutorial as my model
  #1
Arnab
Guest
 
Posts: n/a
Hello ,

My colleague and me are trying to do a combustion problem in a rotor with 20 passages where in fuel-air mixture is sent in from one port to the passages and there is another port for hot gas injection.

when the stoich fuel meets the hot gas injection, there should be combustion taking as the conditions are favourable and as the combustion model specified. But we are not able to get the combustion.

We looked at the combustion tutorials which comes with the installation CD and they are mostly PPDF models and tutorials having combustion using ignition cells.

But my model is Unpremixed/Diffusion Combined time scale model with no ignition cells but combustion due to hot gas injection (assuming it is possible).

So we need a similar combustion tutorial so that I can setup my model along the same lines.

Would be waiting eagerly!!!

Thanks and Regards, ARNAB
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Tutorial 13 Internal Combustion Engine Wei CD-adapco 11 March 6, 2009 07:24
Mesh similar to tutorial 20 Marie S CFX 1 August 27, 2008 04:25
Coal combustion tutorial Chetan FLUENT 3 May 4, 2007 00:11
Combustion tutorial. Nitesh FLUENT 1 July 20, 2006 14:44
VOF (or similar Model) David Watkinson CD-adapco 0 July 9, 2001 09:14


All times are GMT -4. The time now is 23:36.