CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > Siemens

ask for help::the error of moving grid

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   June 14, 2005, 10:53
Default ask for help::the error of moving grid
  #1
shure
Guest
 
Posts: n/a
hello,everyone. i have made a 3D model about moving mesh just like tut11. i can do the "pmovlink" and "starlink".but when it is going to analysis, a error appeared:

***error #240 *** 884 master faces and 477 slave face remain unmatched.check moving grid commands,or change area tolerance factor(RCON 12) current tolerance factor: 0.200e-01 change to at least:1.000

i have change the RCON 12 to 1,but the error remained. can anyone tell me why the error happened,and hoee to solve it. and how to setup the master and slave at the boundary???
  Reply With Quote

Old   June 16, 2005, 01:10
Default Re: ask for help::the error of moving grid
  #2
som
Guest
 
Posts: n/a
It may be because of attach boundary.
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
moving grid mazaheri FLUENT 1 July 19, 2006 13:07
moving grid Dr C.Bhasker Siemens 4 August 31, 2005 03:29
Grid Moving Karthik Krishna FLUENT 4 February 23, 2005 08:57
HELP: moving grid Sunlight007 Siemens 0 June 5, 2003 18:11
Moving grid(BC) faithkim Main CFD Forum 11 September 11, 1999 15:07


All times are GMT -4. The time now is 02:23.