CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CD-adapco

Question about moving meshes at star-cd 3.22

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   June 22, 2005, 03:22
Default Question about moving meshes at star-cd 3.22
  #1
Tiny
Guest
 
Posts: n/a
Question about moving meshes at star-cd 3.22

Hello I am a new hand; I have a question at moving meshes.

Can anyone help me? Please.

7-1 describes: The sliding mesh method utilises two basic moving mesh operations:

1. Change of mesh geometry 2. Change of cell connectivity

Now, if I want use method one, Where I should go to write cgrid.cgrd ?or how to write?

I doníŽt understand what it is describing?

Thank you and have a good time.
  Reply With Quote

Old   June 22, 2005, 08:49
Default Re: Question about moving meshes at star-cd 3.22
  #2
Guillaume
Guest
 
Posts: n/a
You have to use both method. Star needs method one to define the movement of the vertices (this is the role of cgrid.cgrd which is written in the working directory). Method two is applied once the move has been done to redefine how the cells are connected to each other given their new location.
  Reply With Quote

Old   June 24, 2005, 18:01
Default Re: Question about moving meshes at star-cd 3.22
  #3
saang
Guest
 
Posts: n/a
I am the one using cgrid.cgrd. The key idea is to prescribe the moving mesh at every time step. I use external source file to read cgrid.cgrd. Then, I prescribe the mesh in cgrid.cgrd.

- Write source file and import to Prostar by using command "ifile". This is the sample of source file

mvgr on, event

memory maxeve 1001

evfi init

*set evno 1 1

*set etim 0 .000001

*defi

evst evno time etim

egrid read cgrid.cgrd

evsa evno

*end

*loop 1 1000 1

- Next, define the moving vertices in cgrid.cgrd. You just prescribe the path of the vertices (using vertex number) u want to move. I think u can find a sample of cgrid.cgrd file in manual

Hope it help u some and Good luck

Saang
  Reply With Quote

Old   June 29, 2005, 11:07
Default Re: Question about moving meshes at star-cd 3.22
  #4
Tiny
Guest
 
Posts: n/a
Dear all I try it Thanks
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
VOF and moving meshes Dave FLUENT 0 May 7, 2007 01:54
Moving meshes charlotte Main CFD Forum 5 September 19, 2006 07:52
Moving meshes Kraev Stanislaw Main CFD Forum 2 April 11, 2003 13:09
Moving meshes, is that possible Stanislav Kraev CD-adapco 0 April 8, 2003 11:23
Is it necessary to apply moving meshes? raymond CD-adapco 9 October 1, 2001 17:11


All times are GMT -4. The time now is 03:13.