CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CD-adapco

Importing Patran files in Comet

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   July 13, 2005, 06:29
Default Importing Patran files in Comet
  #1
pp
Guest
 
Posts: n/a
Hi,

is it possible to import patran mesh file in Comet in a manner that region definitions from imported file will be conserved?

Imported patran input file is crated with external mesh generator.

Regards, pp
  Reply With Quote

Old   July 13, 2005, 09:05
Default Re: Importing Patran files in Comet
  #2
4xF
Guest
 
Posts: n/a
As a rule of thumb: 1) Use the NASTRAN (resp. NASTRAN-L if you use GridGen) format instead of the PATRAN format. PATRAN export does not always work. 2) You will be able to collect the boundary information unless you export the grid using the STAR-CD format.

Hope this helps...
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Importing files Meenu FLUENT 0 October 5, 2007 13:35
Importing Patran mesh into Gambit Trac FLUENT 1 September 29, 2005 10:32
Importing Nastran/Patran files in Comet pp CD-adapco 0 July 11, 2005 08:56
Importing DXF files Seb De La Haye Phoenics 2 December 6, 2003 18:36
Exporting Ideas files into Patran Neutral Dickie Main CFD Forum 0 February 7, 2001 12:39


All times are GMT -4. The time now is 15:14.