CAD-free CFD
Hello all,
Are any of you using CAD-free CFD? I have read a lot of paper about it. The idea is to place CFD upstream of the CAD in the design process. The CFD engineer provide to his CAD colleagues dimension range (length, diameters, thickness, etc...) and limits within which he can design the product according to the CFD analysis. And then the final design comes back to cfd to check it is within the ranges and results. It is reported to decrease the time to market much more than "integrated CFD in the CAD" where endless discussion occurs. This allows for a margin for errors and assumptions from the CFD side. The knowledge of these margin and errors comes from experience or expertise only. It is a more realistic approach in the manufacturing world. What is your view on this? Guten Abend, Herbert |
Re: CAD-free CFD
I have seen a bit about it, there was a presentation on it at the london user conference. It seemed quite interesting as it tends to produce quite organic designs that reflect the flow and not what a design engineer thinks it should look like
|
Re: CAD-free CFD
HELLO ITS REALLY NICE ONE.
|
All times are GMT -4. The time now is 15:34. |