CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CD-adapco

problems replacing old boundaries

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   August 3, 2005, 17:31
Default problems replacing old boundaries
  #1
Jared
Guest
 
Posts: n/a
I have been using simple boundaries on some complex models and allowing them to converge. I then put the correct boundaries on and let the model converge but the results are the same as with the simple boundaries. I am writing a new problem file after applying these new boundaries. Anything else that should be done?
  Reply With Quote

Old   August 3, 2005, 17:39
Default Re: problems replacing old boundaries
  #2
Tom
Guest
 
Posts: n/a
Jared, If I am not mistaken, after changing boundaries (not boundary conditions) you need to rewrite the geometry file. Tom
  Reply With Quote

Old   August 3, 2005, 17:43
Default Re: problems replacing old boundaries
  #3
Jared
Guest
 
Posts: n/a
I have also tried that without any success.
  Reply With Quote

Old   August 3, 2005, 18:41
Default Re: problems replacing old boundaries
  #4
William Blake
Guest
 
Posts: n/a
Are you doing a normal restart? You have to do a "rdat init" instead.
  Reply With Quote

Old   August 5, 2005, 19:36
Default Re: problems replacing old boundaries
  #5
Hubert Janocha
Guest
 
Posts: n/a
select the right restart option, e.g.

- standard restart (possibly after a hardware crash),

- restart with new boundary values

- restart with the previous run only as an initial field.
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
ParaView Postprocessing problems with cyclic boundaries christian OpenFOAM Paraview & paraFoam 10 June 26, 2009 05:49
Replacing Zones Steve FLUENT 0 December 4, 2007 01:13
Problems with cyclic boundaries in blockMesh marhamat OpenFOAM Native Meshers: blockMesh 1 April 17, 2007 10:06
Replacing components in a scalarField grtabor OpenFOAM Running, Solving & CFD 1 February 5, 2007 13:24
Problems with different boundaries Sven CD-adapco 0 November 24, 2003 12:00


All times are GMT -4. The time now is 06:29.