CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CD-adapco

es-ice/ problems with the 3-D template

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   August 8, 2005, 12:34
Default es-ice/ problems with the 3-D template
  #1
Colin
Guest
 
Posts: n/a
Hi all,

When I make the 3-D template (before mapping), there is a significant offset in the z-direction between the dome of the template and the dome of the geometry. I noticed this when doing a d-plot of the template and geometry. Does anyone have any idea why this is occuring, or how I can resolve this problem. I believe that I am getting negative volumes as a result of this offset. Thanks in advace.

Colin

Marquette University
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Template for CFX-Post Bloshchitsyn Vladimir CFX 1 June 18, 2007 00:15
Template for operator overloading shuo OpenFOAM 0 November 10, 2006 22:17
mixture template co2 FLUENT 7 May 11, 2004 15:07
mixture template co2 FLUENT 0 April 15, 2004 12:00
about the single splitter template in Turbogrid O' CFX 1 January 3, 2001 11:11


All times are GMT -4. The time now is 06:58.