CFD Online Discussion Forums

CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)
-   Siemens (https://www.cfd-online.com/Forums/siemens/)
-   -   new user please help (https://www.cfd-online.com/Forums/siemens/54859-new-user-please-help.html)

Yogesh September 10, 2005 07:02

new user please help
 
I am fixing the mesh problems. Initially it is giving 6 unresolved elements.No other problem in mesh. As i fix them it is giving about 112 failed elements but only 50 elemtns in CPMATCH criteria no other error. Please guide me how should i over come CPMATCH problem

thanks

staruser September 10, 2005 13:06

Re: new user please help
 
Check all couples and use the option to create a new couple set with all failed couples. Delete your cell (and vertex) cell and open Lists > Couple List. Start with the first couple and put master cell into cells set. With "plfa on" you can check on which cell face the couple is. Then extend the cell set with the first slave, check it visualy; then add the next slave etc. If a slave is missing, you can select all vertices on the cell face and use "cset add vset all" or "cset add vset any" if "all" fails. In the couple list panel you can add slaves to the active couple.

yogesh September 12, 2005 01:10

Re: new user please help
 
thanks for help staruser now it is giving all cells as disconnected cells

staruser September 12, 2005 17:49

Re: new user please help
 
Disconnected means that you have more than one part in your model. Do you want that? If you use Tools > Check > Connectivity, you whould get 1 or -1 in post register 4. If you turn on contour plot you should be able to get a view of the problems.


All times are GMT -4. The time now is 23:12.