CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > Siemens

Call of Ratusr.f

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   October 12, 2005, 14:36
Default Call of Ratusr.f
  #1
jojo
Guest
 
Posts: n/a
Hi everyone,

Although I have set C148 to -1, Ratusr.f is not called by star. What must I do to make it work, please?

Thanks a lot for your help.

JoJo
  Reply With Quote

Old   October 12, 2005, 14:37
Default Re: Call of Ratusr.f *NM*
  #2
jojo
Guest
 
Posts: n/a
  Reply With Quote

Old   October 14, 2005, 03:07
Default Re: Call of Ratusr.f
  #3
elvis
Guest
 
Posts: n/a
i don't know
  Reply With Quote

Old   October 14, 2005, 09:48
Default Re: Call of Ratusr.f
  #4
Jamie
Guest
 
Posts: n/a
Which version of the code are you using.
  Reply With Quote

Old   October 14, 2005, 10:31
Default Re: Call of Ratusr.f + sigsegv signal
  #5
jojo
Guest
 
Posts: n/a
Hello everybody.

Thanks to Jamie (--> I use 324) and Elvis for your message.

I have found the answer. It seems that once Ratusr.f has been written in the ufile directory, one has to enforce Prostar to save the chemical scheme again (by erasing and rewriting something in it). By doing this, Star will 'see' Ratusr.f at the next simulation and will link it.

I have another question: sometime, my simulation crashes with the message on the main window:

============================= [ 1 ] ***Received signal sigsegv - exiting PNP: Shutdown [2005-10-13-13:50:00] Execution aborted by request (SIGABRT) after 398 seconds (TOTAL ELAPSED TIME). =============================

I find nothing else in the .run and .info file. What does happen?

  Reply With Quote

Old   October 17, 2005, 14:37
Default Re: Call of Ratusr.f + sigsegv signal
  #6
Jamie
Guest
 
Posts: n/a
Not sure what the problem is. I'd double-check the user coding. I once had a typo in a variable name. The user coding would compile without an error but then the run would seg fault. Once I found the typo it ran fine.
  Reply With Quote

Old   October 17, 2005, 15:33
Default Re: Call of Ratusr.f + sigsegv signal
  #7
jojo
Guest
 
Posts: n/a
Thanks for your message.

The problem I have seems to be related to convergence with the VODE solver. I have solved it by imposing mass fraction exponents > 1 on every specie to relax the strength of the reaction (the pre-exponential factor must be kept to 1 as it enforces equilibrium).
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
call for help sihat FLUENT 1 October 9, 2007 06:53
UDF CALL FOR PRESSURE D Harvey FLUENT 2 June 3, 2004 22:46
file call CMB Siemens 1 October 17, 2003 13:05
Call for papers Steve Zhang Main CFD Forum 0 December 7, 2001 10:46
Call for Papers Tom Gutjahr Siemens 0 April 28, 2000 07:42


All times are GMT -4. The time now is 04:48.