CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CD-adapco

mass flow rate

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   October 1, 2005, 10:21
Default mass flow rate
  #1
kris
Guest
 
Posts: n/a
how should I input the particle's mass flow rate on cyclic boundary of 60 degree in the cylider model

For example, If cylinder model have 60 degree of 360 degree, mass flow rate of 6kg/s at lagrangian frame for particle, which is correct, using (6kg/s)/(360/60) or 6kg/s??

In my case, if I use a case of (6kg/s)/6, my maximum temperature decrease totally 1/2.

  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Mass flow rate of the DPM mass sourse ?? Rhinocao FLUENT 3 January 21, 2011 13:10
Mass Flow Rate!!! haiduc FLUENT 1 June 7, 2007 10:08
DMP mass flow rate Don Parsons FLUENT 3 April 17, 2007 02:30
Mass flux and mass flow rate us Phoenics 10 March 31, 2006 02:06
How are the mass flux and mass flow rate defined? Miles CD-adapco 2 November 7, 2002 09:45


All times are GMT -4. The time now is 06:21.