CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CD-adapco

Ngeom Crashing on Trimmed / Hexahedral Mesh

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   October 10, 2005, 07:44
Default Ngeom Crashing on Trimmed / Hexahedral Mesh
  #1
Fr Ted Crilly
Guest
 
Posts: n/a
Hi Star users,

I keep getting the command ngeom crashing out when generating the mesh files for use in Star-Design (pro-vis) for visualising the results.

It appears to only happen when the mesh has been a trimmed type mesh, a tetrahedral mesh works fine all the time.

Has anyone got any sugguestion to resolve ngeom crashing when using a trimmmed cell mesh, as i prefer to use a flow aligned trimmed mesh rather than tetra mesh for better accuracy etc

-ted

  Reply With Quote

Old   October 13, 2005, 03:44
Default Re: Ngeom Crashing on Trimmed / Hexahedral Mesh
  #2
William Blake
Guest
 
Posts: n/a
What version of prostar are you using. I usually have several different versions of star and prostar around and one of them will most likely do what I want

Maybe you should get v326 which is available now.

One very good thing there is the 32bit linux version compiled with the intel compiler. It runs about 34 percent faster for one of my test cases (single processor)!!!

  Reply With Quote

Old   October 13, 2005, 07:08
Default Re: Ngeom Crashing on Trimmed / Hexahedral Mesh
  #3
Fr Ted Crilly
Guest
 
Posts: n/a
hi dude,

using 3.22, will check out 3.26

ted
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
CFX Mesh crashing Blade CFX 3 December 30, 2008 11:30
Tetrahedral and hexahedral mesh based on FVM kuang Main CFD Forum 0 July 20, 2008 04:52
trimmed mesh Tester Main CFD Forum 0 January 6, 2008 12:32
Trimmed mesh in Proam Sam CD-adapco 1 May 29, 2005 20:16
trimmed mesh novice CD-adapco 5 April 18, 2005 03:32


All times are GMT -4. The time now is 13:26.