CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > Siemens

HPC with STAR-CD 3.22

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   October 24, 2005, 12:22
Default HPC with STAR-CD 3.22
  #1
vigorzxy
Guest
 
Posts: n/a
When I did my simulations under a server with 4 AMD Opetran CPU, I tried the "star hostname, 4" but echoed the right-handed error (including the moving mesh in case). How should I set-up the star command to run the parallel computations? By the way, the Lagrangian multi-phase flow was also inclued in my case.

Thanks a lot!
  Reply With Quote

Old   October 25, 2005, 01:36
Default Re: HPC with STAR-CD 3.22
  #2
carno
Guest
 
Posts: n/a
U have moving mesh. So be cautios while using HPC. You have to use manual option while giving HPC run for moving grid problems. All the moving mesh cells should be on one cpu. Read the appendix H in star userguide to use manual option. Default option is metis.
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
how to export a mesh from star design to star cd aounallah Siemens 4 March 6, 2009 07:22
Star Design to Star-CD(Prostar) AB Siemens 5 October 28, 2004 13:21


All times are GMT -4. The time now is 21:08.