CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CD-adapco

free edges on patches

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   November 15, 2005, 04:03
Default free edges on patches
  #1
florian
Guest
 
Posts: n/a
hi,

i'm trying to fit a rectangular shell around a gap of my surface. when i use the patch command to build the outer four shells the pro-am surface check tool displays "free edges" for each new edge. what did i wrong? why they are open?

thanks for help! florian
  Reply With Quote

Old   November 17, 2005, 02:17
Default Re: free edges on patches
  #2
Tushar
Guest
 
Posts: n/a
The free edges error appears when surface is not closed. Ensure that surface is closed. Secondly try the option Fix Surface Problem -> Using cursor to creat the shell for given four vetices
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
StitchMesh on two patches anita OpenFOAM Native Meshers: blockMesh 31 April 4, 2013 11:51
Find the common edges shared by two patches liu OpenFOAM Running, Solving & CFD 1 October 20, 2008 21:48
How to define these patches zhoubinwx Open Source Meshers: Gmsh, Netgen, CGNS, ... 6 September 15, 2008 08:52
extruding patches Ben CD-adapco 7 June 23, 2004 02:56
rediation patches novice CD-adapco 2 February 25, 2004 04:53


All times are GMT -4. The time now is 11:30.