CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CD-adapco

Help~ Pressure boundary seting by using *.tbl(new)

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   November 19, 2005, 09:26
Default Help~ Pressure boundary seting by using *.tbl(new)
  #1
amogo
Guest
 
Posts: n/a
Hellow~ The data used for setting the relation of pressure versus time are described as follows(content of *.tbl file):

----------------------------------------------------

TABLE 20-0.1

LOCAL 1

VOPTION ERROR

INDEPENDENT TIME 3

TIME 0.00000 3.22586 6.451613

PR

1645.0

-1451.9

917.85

----------------------------------------------------

The above includes three pressure-time data for simplification, but it was found that when the data exceed 32 (time VS pressure)values in the *.tbl file, the relation of time and pressure can't be plotted by using GRAPH, then the message "segmentation fault" aprrears. It seems that in the file more than 32 PR vs time data are not allowed, but it's not reasonable, isn't? Or if there is any other suggestion, please tell me... thanls a lot!! ^^

  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Help~ Pressure boundary seting by using *.tbl amogo CD-adapco 0 November 19, 2005 09:22
Seting up pressure boundaries Nori FLUENT 0 September 13, 2005 10:43
seting values for coefficients and parameters Arvanitidis Mark Phoenics 0 June 3, 2003 07:45
Seting Boundary Condition in Polar Uttam Sen Phoenics 1 March 28, 2003 06:56
Seting up star on linux Joel CD-adapco 1 April 15, 2002 11:08


All times are GMT -4. The time now is 06:27.