CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CD-adapco

under relaxation factor

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   November 22, 2005, 23:58
Default under relaxation factor
  #1
novice
Guest
 
Posts: n/a
Hi,

I am running a transient analysis with free surface. My run is diverging after some time, so I have reduced the time step. But this has very less effect on divergence. When I reduced the 'under relaxation factor for pressure correction' the run is running fine. But after some time it again diverged. So I reduced it further. So I just want to know how low I can go there? WHat is the effect. Thanks all
  Reply With Quote

Old   November 26, 2005, 02:10
Default Re: under relaxation factor
  #2
DB
Guest
 
Posts: n/a
Normally under-relaxation factor should be between 0.8-1.0

DB
  Reply With Quote

Old   November 28, 2005, 05:18
Default Re: under relaxation factor
  #3
zxaar
Guest
 
Posts: n/a
If you case the convergence is difficult, then you could decrease the urf for pressure to 0.1 from default of (i think 0.3), and increase the urf of mom to 0.8 to 0.85. Further increase the pre and post iteration in AMG solver settings, this will keep the solver stable. If it does not help then check the skew of the mesh, the unstablity is due to this (most probably)

  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
what is under relaxation factor? rayy FLUENT 19 June 8, 2015 19:03
relaxation factor adam Main CFD Forum 3 February 4, 2008 11:10
help in relaxation factor SONALI FLUENT 5 August 11, 2005 20:27
Under Relaxation Factor AB CD-adapco 0 November 29, 2004 14:56
Relaxation factor Moon CD-adapco 1 June 13, 2003 11:13


All times are GMT -4. The time now is 23:15.