CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CD-adapco

Field data

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   November 29, 2005, 01:10
Default Field data
  #1
Jorge
Guest
 
Posts: n/a
I am new user of Star-cd 3.22, modeling a bank tube with a trimmed mesh of 28417 cells, using high reynolds model with a Re=25000, at boundary condition i am using inlet and pressure at aoutlet. The problem i have is after solution converged, the velocity U,Vmag getting from post register is cero in most of the vertices alined through the tubes. Any help should be appreciated.
  Reply With Quote

Old   November 29, 2005, 12:31
Default Re: Field data
  #2
Ben
Guest
 
Posts: n/a
If you want vertex data you need to user caver first, at the moment it sounds like you havent done this so you are trying to look at vertex data when there is non....on another note if you are modelling plane channel flow with that low cell count, I would'nt use trimmed cells. Just create hexas using vc3d or blocks.
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
External magnetic field data Richard Lee FLUENT 2 March 10, 2010 11:22
may i import flow field data to do particle track? Hao FLUENT 8 April 29, 2008 08:22
plotting field data thomas CD-adapco 5 November 16, 2006 19:09
Putting submesh field values into field on parent mesh helmut OpenFOAM Running, Solving & CFD 2 June 20, 2006 07:31
field by field decomposition vs. component-wise zhanglei Main CFD Forum 0 January 5, 2001 10:06


All times are GMT -4. The time now is 00:35.