# Re: how to do this turbine blade passage flow nanl

 Register Blogs Members List Search Today's Posts Mark Forums Read

 January 12, 2006, 12:37 Re: how to do this turbine blade passage flow nanl #1 manish Guest   Posts: n/a hi to all .I want to siumulate flow through bladepassage of a radial inflow gas turbine.It has presure drop of 2.8,so i have not to use stator.I have 12 no of blades.I am taking only one.It has w=1680 rad/sec (60,000 rpm).Inlet pressure is 2.83 bar (Total pr) outlet is 1.12 bar.Inlet total temp is 923 K and outlet temp is 760 K.mass flow rate is 0.596 kg/sec.Flow velocity at inlet 125 m/sec.I have given different boudary conditions but at each time it is giving very erronous results.i.e .pressure goes upto 9 bar. (1) when i a m giving mass flow at inlet and pressuire at outlet then it is giving erromous resuts.mass flow is conserved but pressure values are far from actualk valus. (2) AT INLET Pressure and oulet pressure .Here pressure valuse have less difrence wit hactual values but mass flow is not mathich. can anybody guide me in this matters.whic hboundary condition i should give.and which initial valus i should give? . second thing is that can i go directly by giving unsteady anal;ysis .or first i have to solve this problem using steady satte and then go throgu hunsteady state. Thnks all.

 Thread Tools Display Modes Linear Mode

 Posting Rules You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is OffTrackbacks are On Pingbacks are On Refbacks are On Forum Rules

 Similar Threads Thread Thread Starter Forum Replies Last Post Subrata FLUENT 1 May 4, 2007 11:28 manish NUMECA 1 November 3, 2006 00:01 manish Phoenics 1 February 21, 2006 10:59 kaen CFX 0 January 17, 2006 23:50 manish FLUENT 0 January 13, 2006 22:50

All times are GMT -4. The time now is 07:41.