CFD Online URL
[Sponsors]
Home > Forums > CD-adapco

best way to set-up model

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   February 3, 2006, 20:36
Default best way to set-up model
  #1
William Wallace
Guest
 
Posts: n/a
Ok here's some pics of the file I intend to use which I have ran through Pro-surf the first one is of the front of the surface and the second is of the rear surface;

http://img.photobucket.com/albums/v8...oSurf1copy.jpg

http://img.photobucket.com/albums/v8...oSurf2copy.jpg

Now my problem is that I want to model the air flow along the front side of the car only and into the intake. What do you think will be the best way to model this. Should I use Pro-am or ES-aero and what will give me the best results. Any advice would be grately appreciated

Regards

Will
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Population balance model for twofluid model pierre OpenFOAM Running, Solving & CFD 7 March 26, 2014 04:39
Surface Reaction Model or Heterogeneous Rxn Model? satheeskannan FLUENT 0 September 2, 2008 19:55
changing model constants in k-e turbulence model Sunil CFX 3 October 3, 2006 13:12
Symmetry model half or total geometrical model in LES vvqf OpenFOAM Pre-Processing 3 March 22, 2006 10:06
Copying boundary conditions from model to model Lior FLUENT 3 September 23, 2004 17:10


All times are GMT -4. The time now is 06:17.