CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CD-adapco

pure sliding

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   February 24, 2006, 05:49
Default pure sliding
  #1
Mac
Guest
 
Posts: n/a
Hi, Need to know if StarCD can do pure sliding(rotation)without attachment boundaries ?? Meaning, if there is a gap between fluid regions, can there happen pure rotation only until it sees another fluid region ?? Please send replies.

Thanks, Mac.
  Reply With Quote

Old   February 28, 2006, 04:31
Default Re: pure sliding
  #2
Arpan
Guest
 
Posts: n/a
hi,

If my understanding is correct, you want to set the gap at 0 rpm and different rotational speed on both sides. If so then you can set the gap rotation with positive and negative sign so it will not rotate.

Arpan
  Reply With Quote

Old   February 28, 2006, 09:33
Default Re: pure sliding
  #3
Mac
Guest
 
Posts: n/a
Thanks Arpan for posting your reply..

Let me frame the question again. Assuming that a rotating member slides across a stationery member and if there is a gap in the stationery member, will the rotating member purely rotate in this gap region ??

Please reply. Thanks a ton.
  Reply With Quote

Old   March 5, 2006, 07:25
Default Re: pure sliding
  #4
Arpan
Guest
 
Posts: n/a
Hello Mac,

Sorry to say but I am not able to answer your question. I am too fresh with star-cd to answer this question.

Regards, Arpan
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Need a help concerning a pure convection problem happysmile Main CFD Forum 6 July 8, 2009 13:24
pure diffusion? Michael FLUENT 0 July 17, 2008 14:37
pure conduction sudhir FLUENT 4 April 17, 2008 02:44
evaporation of pure liquid prasanth FLUENT 0 November 19, 2003 13:41
Pure diffusion Case prasat FLUENT 1 September 15, 2003 00:12


All times are GMT -4. The time now is 06:59.