CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > Siemens

Making program run faster

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   March 7, 2006, 09:12
Default Making program run faster
  #1
Konstantinos
Guest
 
Posts: n/a
Are there any easy alterations that u can do on a model so that the iterations rus faster? Because its moving really slow... Im using star-cd 3.26
  Reply With Quote

Old   March 7, 2006, 10:09
Default Re: Making program run faster
  #2
Mork
Guest
 
Posts: n/a
Decrease the number of cells, use simpler or less models, buy more and faster computers....

What are you trying to do?
  Reply With Quote

Old   March 7, 2006, 12:52
Default Re: Making program run faster
  #3
Konstantinos
Guest
 
Posts: n/a
Modelling the flow around a formula car... (Not a formula 1 obviously, its a formula student car). So i cant use a different model. Computers are quite fast because they r university computers! How do i decrease the number os cells?
  Reply With Quote

Old   March 7, 2006, 23:29
Default Re: Making program run faster
  #4
Mac
Guest
 
Posts: n/a
You need to re-mesh the car model again, to decrease the number of cells.
  Reply With Quote

Old   March 8, 2006, 06:09
Default Re: Making program run faster
  #5
John Luo
Guest
 
Posts: n/a
how many cells you are using. To simulate a 3D car body, it would be advisable to run in parallel mode using as many processors as you can grab. It is usually true if you use 2 processors, time reduced by half, and so on.
  Reply With Quote

Old   March 8, 2006, 06:35
Default Re: Making program run faster
  #6
Konstantinos
Guest
 
Posts: n/a
Thanks!
  Reply With Quote

Old   March 8, 2006, 06:39
Default Re: Making program run faster
  #7
Konstantinos
Guest
 
Posts: n/a
I dont know how many cells the problem is... Anyway I will try running it on two processors then, thanks!
  Reply With Quote

Old   March 8, 2006, 06:53
Default Re: Making program run faster
  #8
matej
Guest
 
Posts: n/a
Konstantinos, obviously if you want some reasonable results, you NEED and MUST read something about CFD (you'll find some references in the CFD-onine book section situated on the top of this page - right hand side). Additionally you MUST check the manuals. I know its a lot of reading, but STAR-CD is not MS Excel. Wait for your advisor and make him to get the training for you.

good luck matej

ps: RTFM stands for 'read the f*** manual' ) which is usually good advice in 99% of cases
  Reply With Quote

Old   March 8, 2006, 10:53
Default Re: Making program run faster
  #9
Zamir Rashid
Guest
 
Posts: n/a
Are you using tets or hex for the case?

If you're using tet mesh (as I always do) I think it would help to use the command TETALIGN ALL which will reorder the vertex numbering and increase uniformity for tet meshes. This in turn would help to reduce memory requirements and computer time.

  Reply With Quote

Old   March 8, 2006, 12:58
Default Re: Making program run faster
  #10
Ben
Guest
 
Posts: n/a
I have to agree with matej unfortunately it seems that you dont know a great deal about the subject, "how can I make my simulation run faster" is in the same bracket of questions of "how many cells do I need", "how big should my cells be", "I am studying X and my results are wrong, why" and so on and so forth.......!
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
near wall faster azmir Siemens 0 December 26, 2007 20:36
Making SIMPLE converge faster Fabio Main CFD Forum 4 April 9, 2006 12:35
Fortran 90 faster than C/C++ B. R. Guirguis Main CFD Forum 48 March 6, 2006 14:49
MicroTunnel V1.2 - Now 6x faster! Axel Rohde Main CFD Forum 0 September 19, 2001 00:34
more RAM or faster CPU?? Fabrizio Grieco Siemens 11 January 23, 2001 08:35


All times are GMT -4. The time now is 17:18.