CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CD-adapco

non convergence

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   March 4, 2006, 11:56
Default non convergence
  #1
giorgio
Guest
 
Posts: n/a
hi all, i have a problem with the convergence of a complex geometry. The program that i use is ccm+ 1.08. i've tried k-e and k-w models, coupled and segregated flow (the velocity of the air is 25m/s) but in any ways after some iterations in the residuals tke and the tdr (or sdr for k-w) go up! what can i do?waht is the problem?maybe numers of cells?kind of cells?
  Reply With Quote

Old   March 7, 2006, 14:50
Default Re: non convergence
  #2
Hubert Janocha
Guest
 
Posts: n/a
In case of pressure boundaries it is always a good idea to choose the same value for the initial pressure.

Imagine, when the pressure difference is to high, the flow (in both cases steady state, or transient) evacuate the geometry, because of the strong accelaration, causes by the greate pressure difference. This gives of course negative density. Since we don't use "anti materia" for a warp engine like in the Enterprise, this is a problem.

The coupled solver is good, but it has a border, too.

If you are using pressure / pressure boundaries choose the value for the initial pressure from the outlet pressure boundary.

When this not helps, answer to this message. There are some other tricks.

  Reply With Quote

Old   March 8, 2006, 11:32
Default Re: non convergence
  #3
giorgio
Guest
 
Posts: n/a
hi Hubert, thanks for your help!i've a velicity inlet, a pressure outlet and only wall (slip (for the wall of the virtual wind gallery) and no-slip). In the outlet, static pressure is set to 0 pa, the same that i have set in the initial condition but it doesn't work. In your opinion may be the problem in the turbulence specification values?or in the courant number too high?

  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
URF and convergence in natural convergence Marie-Anne Main CFD Forum 11 September 11, 2009 10:07
convergence vijay FLUENT 6 February 1, 2006 04:04
convergence vijay Main CFD Forum 1 January 30, 2006 14:13
too bad convergence Davoche Main CFD Forum 2 November 20, 2005 06:08
About convergence LQ CFX 3 June 2, 2005 23:43


All times are GMT -4. The time now is 23:03.