CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CD-adapco

zero or negative volume cells

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   March 4, 2006, 12:03
Default zero or negative volume cells
  #1
giorgio
Guest
 
Posts: n/a
hi all, i've to mesh a complex geometry. I try to mesh it with star-design in polihedral cells but every time there are few cells that have zero or negative volume. there i a way to overcome this problem whit ccm+ or other program?what can i do to avoid this problem?
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Negative densities at more than 100 cells Luke CD-adapco 5 December 2, 2008 05:14
Problems with negative volume cells Shashank CD-adapco 2 April 4, 2007 18:24
How to fix negative volume cells etc. Harry CD-adapco 7 July 24, 2005 07:17
About negative volume of cells! xhliu1 CD-adapco 0 April 15, 2005 23:49
negative cells Armin Gips FLUENT 0 January 28, 2002 02:27


All times are GMT -4. The time now is 05:20.