CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   CD-adapco (http://www.cfd-online.com/Forums/cd-adapco/)
-   -   Moving Bed (http://www.cfd-online.com/Forums/cd-adapco/55242-moving-bed.html)

Ahmad Al-Zoubi March 20, 2006 21:02

Moving Bed
 
Hi all,

I want to simulate a moving bed in a cylindrical tube. Hot air inlets from the tube side near the bottom and leaves near the top. Cold spheres enters from the top and leave the bottom of the tube. The Spheres flow rate at inlet equals that at the outlet and the tube is always full. The speed of the spheres is slow in comparison to the air.

I want to determine the temperature distribution at steady state.

Thanks a lot in advance.

Ahmad


All times are GMT -4. The time now is 19:09.