CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   CD-adapco (http://www.cfd-online.com/Forums/cd-adapco/)
-   -   Initialization (http://www.cfd-online.com/Forums/cd-adapco/55383-initialization.html)

a student May 19, 2006 06:43

Initialization
 
Hello everybody,

Thermophysical models and properties > liquids and gases > Initialization; for this panel the only option available is manual initialization for my model. Why code initialization is not possible?

on this panel there are two tabs-flow conditions and turbulence. Do I need to specify velocity,pressure,temp.,estimated Max velocity and turbulence in this panel considering my run is initial,i.e. not a restart. As per my understanding this values specify condition of cylinder before starting piston motion. Please correct me if I am wrong.

Please Please Please help.

Thanking you.


John May 19, 2006 08:03

Re: Initialization
 
For transient run, like boundary condition, user has to provide initial condition. Initialisation by the code only applies to steady flow. The velocity, temperature etc specified by you will be used as the starting condition

a student May 19, 2006 12:55

Re: Initialization
 
Hello John,

Thank you very much once again.



All times are GMT -4. The time now is 04:35.