CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CD-adapco

to whom are expert in proam and fluent

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   May 28, 2006, 07:33
Default to whom are expert in proam and fluent
  #1
moh
Guest
 
Posts: n/a
hello

can proam deal with two volumes (internal and external) which are shared in some areas as inside the car and outside the car.

in fact fluent is more powerfull than proam in this case

also if i want to make susurfaces with difrent thickness for example spme areas i want to make subsurface 1.0mm but others i want the thickness 0.5mm proam cand somthinh like this.as fluent.

please help me

moh
  Reply With Quote

Old   May 28, 2006, 07:56
Default Re: to whom are expert in proam and fluent
  #2
ben
Guest
 
Posts: n/a
the new STAR-CCM+ mesher is a very powerfull piece of kit, can deal with multiple volumes both connected and disconnected, give it a try it certainly brings a smaile to my face!
  Reply With Quote

Old   May 29, 2006, 05:28
Default Re: to whom are expert in proam and fluent
  #3
Ralphie
Guest
 
Posts: n/a
You can do both. When creating your subsurface you will find possibilities to define internal baffles as well as variable subsurface thickness. refer to the manual for details.
  Reply With Quote

Old   June 1, 2006, 00:51
Default Re: to whom are expert in proam and fluent
  #4
ahmad
Guest
 
Posts: n/a
Hi; does proam generate dynamic mesh for in cylinder flow applicable for internal combustion engine? I look forward to hearing you.

  Reply With Quote

Old   June 1, 2006, 01:05
Default Re: to whom are expert in proam and fluent
  #5
student
Guest
 
Posts: n/a
For incylinder flow its better if you generate mesh with block method in prostar. If you use es-ice then there is no question of generating cyl. mesh. For moving piston in pro-star, it is necessary that you activate/deactivate whole cell layer, which would be very difficult if you use pro-am. And writting CGRID commands, ohh no.. you dont want to do that.
  Reply With Quote

Old   June 7, 2006, 04:32
Default Re: to whom are expert in proam and fluent
  #6
Simloo
Guest
 
Posts: n/a
Pro-AM can do both internal and external meshing (check user guide & Pro-AM tuts). In case of subsurface you have to mention which surfaces you want different thickness.

Regarding incylinder problems. It is better to go for multi block method.

  Reply With Quote

Old   June 7, 2006, 04:39
Default Re: to whom are expert in proam and fluent
  #7
student
Guest
 
Posts: n/a
wow, really?
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
To who are expert Tony FLUENT 1 February 24, 2007 15:26
to whom are expert using proam and fluent moh CD-adapco 0 May 28, 2006 07:27
Help proam yogesh CD-adapco 8 February 16, 2006 06:19
proam sankar CD-adapco 0 February 23, 2005 05:58
Help on EXPERT Tim Phoenics 5 August 21, 2001 14:15


All times are GMT -4. The time now is 05:43.