CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   CD-adapco (http://www.cfd-online.com/Forums/cd-adapco/)
-   -   NEED HELP FOR A MOVING MESH PROBLEM SETUP (http://www.cfd-online.com/Forums/cd-adapco/55438-need-help-moving-mesh-problem-setup.html)

bijan June 10, 2006 06:26

NEED HELP FOR A MOVING MESH PROBLEM SETUP
 
Hi i am working on in cylinder flow without combustion and i wanna setup a moving mesh problem to run cases for the in-cylinder flow. i have read the tutorials but i didn't got them. they seem too comlicated, especially the EVENTS. i don't know how to setup a case. of course i don't have access to the tutorials files and only i have read the PDF files. i would be grateful if you let me know what to do. that would be of my pleasure if somebody who has done a similar project let me know about the neccessary information and files i need to run the case. thank you very much and i'm waiting for your answers.

Ralphie June 12, 2006 03:18

Re: NEED HELP FOR A MOVING MESH PROBLEM SETUP
 
Sometimes CFD is quite complicated... You should get hold of the tutorials and work through them, they usually come with your Star-CD installation.

bijan June 12, 2006 04:54

Re: NEED HELP FOR A MOVING MESH PROBLEM SETUP
 
yes that's right. i wonder why starcd has so complicated procedures to do some projects. is there any way to do the project simpler??? i am totally confused.


All times are GMT -4. The time now is 05:10.