CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CD-adapco

Baffles

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   June 28, 2006, 11:04
Default Baffles
  #1
Siddharth
Guest
 
Posts: n/a
Hi.

Can i use baffle layer at a coupling interface? I am having some warning messages saying baffle number xxxxx not attached to any cell, baffle ignored. if i neglect this warning, will i be getting flow across the baffle also???

Thanks
  Reply With Quote

Old   June 28, 2006, 11:08
Default Re: Baffles
  #2
Ben
Guest
 
Posts: n/a
you cant have a baffle on a couple, otherwise the vertex deffinition for one side would be different to the other. And yes if you ignore the message you will get flow through
  Reply With Quote

Old   June 28, 2006, 12:52
Default Re: Baffles
  #3
Siddharth
Guest
 
Posts: n/a
Thanks !!!

But if i remove the coupling definition corresponding to the baffle area, then will i work like a partition / baffle???
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Baffles in Flow-3D v 9.3 Julien FLOW-3D 2 December 15, 2014 01:10
BAFFLES PROBLEM subhash CD-adapco 0 November 29, 2005 07:16
adding baffles Jared CD-adapco 1 September 19, 2005 11:29
Permeable baffles m-hack CD-adapco 0 October 29, 2003 03:14
Visualisation of baffles! Anders Jönson CD-adapco 1 August 9, 2000 01:31


All times are GMT -4. The time now is 02:01.