CFD Online Logo CFD Online URL
Home > Forums > CD-adapco

parameters in proamm volume meshing

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   June 29, 2006, 22:25
Default parameters in proamm volume meshing
Posts: n/a
Please is there any guide for selecting the Edge Feature Angle, Min/Max Cell Size, Subsurface Thickness, Floor Value and Feature Edge during volume meshing in proamm? I could not find any specific guide in the prostar/proamm user guide and tutorial for selecting these parameters. Thanks for hints/response.
  Reply With Quote

Old   June 30, 2006, 15:58
Default Re: parameters in proamm volume meshing
Posts: n/a
Not really.

In general, optimal values of these parameters are specific to the nature of the geometry & flow field.

So the only guide is to use what's correct - or at least adequate - for your problem.

The panel should have defaults which are reasonable for a wide range of problems.
  Reply With Quote

Old   July 7, 2006, 06:57
Default Re: parameters in proamm volume meshing
Posts: n/a

Lesser the feature angle you give, more the edges will capture.There are no hard and fast rules of specifying feature angles.usually feature angle will be specified between the range of 15 to 45 degreees.

Cheers, simon

  Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
Importing meshing parameters in CFX-Mesh Antti Kultanen CFX 0 June 16, 2008 11:39
difference between Meshing Parameters Mihail CFX 1 April 29, 2008 03:44
Meshing with parameters Renaud FLUENT 0 May 30, 2006 09:02
Singularity of grid?Volume meshing vs face meshing Ken Main CFD Forum 0 September 4, 2003 11:09
Volume Meshing & Face Meshing? singularity of grid ken FLUENT 0 September 4, 2003 11:08

All times are GMT -4. The time now is 01:08.