CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CD-adapco

mooving mesh

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   July 26, 2006, 04:57
Default mooving mesh
  #1
student
Guest
 
Posts: n/a
Hy !-----------------------------------------------! ! ! ! 1--------1 ! ! 1 1 --> ! ! 1--------1 ! ! ! !-----------------------------------------------! I would like to have the same type of geometry where the big tube have a coarse mesh and the small inside square have a very fine mesh.. also I would like that my small square moves in the vector direction with a constant velocity ( and also that he always keep is fine mesh and outside a coarse mesh) Is it possible to do it? What should I use? Mooving mesh?

  Reply With Quote

Old   July 26, 2006, 04:59
Default Re: mooving mesh
  #2
student
Guest
 
Posts: n/a
sorry we cant see the geometry type but I explain it for yyou it is simple there is a big tube with a coarse mesh and inside there is a small square where the mesh inside is very fine and I would like that the small square mooves into my tube with a velocity
  Reply With Quote

Old   July 26, 2006, 05:11
Default Re: mooving mesh
  #3
css@csmsoftware.com
Guest
 
Posts: n/a
hai,

I hope tutorial 11 (two objects passing each other) in STAR-CD manual will help for your application.

shan

  Reply With Quote

Old   July 26, 2006, 05:53
Default Re: mooving mesh
  #4
student
Guest
 
Posts: n/a
thanks But in the tutorial the mooving mesh is a block I wanted to be a fluid and the same tipe of fluid that is inside the big tube is it possible
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Create fine mesh that grows to coarse mesh (Urgent CZ FLUENT 1 January 3, 2009 11:36
mooving mesh problem inside the cylinder m.kantha rao FLUENT 1 May 29, 2008 03:20
Oscillatory mesh motion setup mesh flux ERROR jaswi OpenFOAM Running, Solving & CFD 5 August 23, 2007 04:41
Icemcfd 11: Loss of mesh from surface mesh option? Joe CFX 2 March 26, 2007 18:10
Mooving Grids Romuald Skoda Main CFD Forum 5 August 22, 2000 07:44


All times are GMT -4. The time now is 04:07.