CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CD-adapco

Pro-amm Problem

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   August 18, 2006, 07:00
Default Pro-amm Problem
  #1
manu
Guest
 
Posts: n/a
Hi, I was using trimmed mesh with custom template. After trimming of custom mesh, I created the surface for extrusion. This surface is having problems. I found free edges at the points of transition from fine mesh to course mesh. This problem is at all the places where course mesh is changing to fine mesh. I tried changing the cell size and transition growth factor to avoid. But still I am facing the same problem. Does anybody have found similar problem. Is it something related to minimum tolerance limit?? I will be grateful if some body can help me that. Thanks for reading.
  Reply With Quote

Old   August 18, 2006, 07:16
Default Re: Pro-amm Problem
  #2
Albessu
Guest
 
Posts: n/a
If you found this problem after you extrude maybe you'll be able to connect this cells by making couples "cpcr cset" command. But in the other hand if it's in the shell maybe you can merge the vertices "vmerge vset" Command.
  Reply With Quote

Old   August 18, 2006, 10:03
Default Re: Pro-amm Problem
  #3
css
Guest
 
Posts: n/a
You need not worry about free edges because those surfaces are going to be extruded as it is.But you should not have non manifold cells,multiple edges and self intersection errors.Clear the above errors and just proceed the extrusion procedure.
  Reply With Quote

Old   August 21, 2006, 01:03
Default Thanks
  #4
manu
Guest
 
Posts: n/a
Thank you very much css and Albessu. It is working now.
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
VOF diffuse problem on two fluids problem Fang Jin FLUENT 5 February 17, 2011 06:38
Problem in Modelling Heat Transfer Problem Deepak R FLUENT 1 December 6, 2007 10:37
Problem in cavity flow problem saad Main CFD Forum 4 November 1, 2007 08:45
natural convection problem for a CHT problem Se-Hee CFX 2 June 10, 2007 06:29
problem in solving "wave generation" problem san FLUENT 2 April 3, 2006 23:37


All times are GMT -4. The time now is 10:55.